If you are running a IO-390, angle valve IO-360 or parallel valve IO-370 more than likely you will experience high oil temps when using a seven-row baffle mounted oil cooler. Depending on the engine type or the high heat climate you operate in your oil temps can be optimized using a thirteen-row oil cooler. The standard baffle mounted oil cooler location will not allow for a larger cooler, this mount has been designed specifically for the RV-8/8A utilizing a thirteen-row oil cooler. The 4130 steel tube mount clamps firmly around the engine mount using a special neoprene rubber channel for a secure chafe free installation. This kit comes complete with powder coated mounts, light weight composite cooling air duct to efficiently directs air over the cooler while allowing for engine baffle movement and oil cooler mounting hardware. If your engine installation requires a higher level of oil cooling, please take a close look at this mounting solution. Oil cooler not included.